Members,
I am attempting to disassemble my just- purchased U.S. Divers J-valve. Quick question: How do I remove the internal brass "switch" reserve part? You know, that part that "clicks" on/off? (See 2nd pic.)
Thanks in advance.
rx7diver
-
rx7diver
- Lung Diver
- Posts: 63
- Joined: Fri Aug 28, 2015 11:22 am
- First Name: Ronald
- Location: Columbia MO
Need help with J-valve disassembly
You do not have the required permissions to view the files attached to this post.
-
antique diver
- Master Diver
- Posts: 2217
- Joined: Sun Dec 10, 2006 12:50 pm
- First Name: Bill
- Location: North-Central Texas
Re: Need help with J-valve disassembly
Unless there is some corrosion in there it should come out with a little gentle help from needlenose pliers. If not, maybe a good soak in vinegar or CLR & hot water about 50/50 (not overnight... and hour or two should do the trick)
Good luck, and keep us posted on your results.
Good luck, and keep us posted on your results.
The older I get the better I was.
-
ScubaLawyer
- VDH Moderator
- Posts: 1669
- Joined: Thu Apr 08, 2010 11:25 am
- First Name: Mark
- Location: Laguna Beach, CA
Re: Need help with J-valve disassembly
As I recall, it just sits in there.
"The diver who collects specimens of underwater life has fun and becomes a keen underwater observer. .. seek slow-moving or attached organisms such as corals, starfish, or shelled creatures." (Golden Guide to Scuba Diving, 1968) 
-
antique diver
- Master Diver
- Posts: 2217
- Joined: Sun Dec 10, 2006 12:50 pm
- First Name: Bill
- Location: North-Central Texas
Re: Need help with J-valve disassembly
Yep, they usually just fall out.
The older I get the better I was.
-
rx7diver
- Lung Diver
- Posts: 63
- Joined: Fri Aug 28, 2015 11:22 am
- First Name: Ronald
- Location: Columbia MO
Re: Need help with J-valve disassembly
Yes, thanks, everyone. I posted this same question over on SB, and Luis H. suggested I gently use needle-nose pliers--which I did. The resistance I originally felt (before I posted yesterday) was due to some old and thickened grease that was packed around the spring of the reserve mechanism. I decided to ask before I forced things and ruined anything.
Everything is apart, and clean (I used 409 since I was out of Simple Green), and now ready to be reassembled.
Thanks again.
rx7diver
Everything is apart, and clean (I used 409 since I was out of Simple Green), and now ready to be reassembled.
Thanks again.
rx7diver
Who is online
Users browsing this forum: No registered users and 7 guests