I have a few new videos uploaded. Hope you will get some good info from them.
https://www.youtube.com/playlist?list=P ... 71PAowVOYz
Moderator: Greg Barlow
I have never had a copy of the ProDiver manual (but would like one for the archives) I have rebuilt several in the past and best I recall it was the same as the Conshelf.SnarkIII wrote: One question though. I have a couple of Pro Divers that my LDS won't touch. Several people on these forums have mentioned the Pro Diver is almost identical to the Conshelf, any thoughts on doing the Pro Divers?
Yes this is the flying saucer first stage. I think all the ports on the first stage are 1/2"Herman wrote:I could not find anything about the first stage but did find the second stage in my 2001 parts manual. It's the same as the as the conshelf 21 and SE2. The supply hose is listed as a 1/2 hose ( a standard 3/8 one would fit since the second stage end is the same). Is this the first stage that looks like a flying saucer?
According to my notes this SEA takes the larger single ply up diaphragm and thicker washer like the Legend..the space capsule version may not. The HP diaphragm is easy to spot cause AL made it in gray.Herman wrote:I am pretty sure the Pro/flying saucer uses the same kit as the Conshelf except you need 1/2 orings for the LP port hoses. Odds are the ones on the hoses are fine and if not, they are easy to replace at any time.
For some reason AquaLung just couldn't leave the Conshelf be, but had to try to "improve" it with more complicated configurations and new names.Herman wrote:The SEA may use the same diaphragm as the Legend but it is different than the Pro. The SEA first stage (like you show) is like the Legend , the air comes in from the side The Pro is linear like the Conshelf but has a wider end.
Return to “Single Hose Regulators.”
Users browsing this forum: No registered users and 4 guests