ColemanJ wrote: ↑Mon Nov 09, 2020 1:21 pm
Yeah I know there is no center output but was planning on using my Conshelf XIV regulators. I thought that US Divers made a solid bar center output manifold but I have been able to confirm it.
@Coleman,
I own the original "Sherwood Double DIN Isolator Manifold" and (tack-welded) bands that you're asking about. I purchased these new ~1993 to use (briefly) with my Sherwood Genesis HP 80's (PST cylinders that have a capacity of ~82 cu ft @ 3,500 psig service pressure). "Briefly", because I switched almost immediately to Genesis HP 100's.
I used this rig for diving in the Great Lakes for a couple of years before I switched to Genesis HP 120's. Actually, the HP 100's were perfect for me for the types of dives I was doing (accelerated deco fives to ~200 ffw for a 25 minute bottom time), but they were too short for me to
easily reach the valves, so I replaced them with the taller 120's. Besides, I was planning on pursuing deeper/longer exposures.
When I switched to the 120's, I purchased an OMS manifold and bands to use with them. So, the Sherwood manifold and bands have sat unused ever since.
Let me know if you're interested in them. I'm sure we can come to some sort of deal. (IIRC, I cleaned the manifold before I stored it away. I can't recall if I replaced the two isolator O-rings before storing it. BTW, you can purchase new burst disc assemblies from Northeast.)
rx7diver