I can't screw
Moderator: Greg Barlow
-
ScubaLawyer
- VDH Moderator
- Posts: 1669
- Joined: Thu Apr 08, 2010 11:25 am
- First Name: Mark
- Location: Laguna Beach, CA
I can't screw
The guy I got the twin 38s from threw in what appears to be an old piece of junk Scubapro MK2(?). Got it home and see there is no yoke screw hole - looks like a fill-whip end on the first stage but it screws on and does not slide back and forth like a fill yoke. Not sure how it would work. Ideas?
"The diver who collects specimens of underwater life has fun and becomes a keen underwater observer. .. seek slow-moving or attached organisms such as corals, starfish, or shelled creatures." (Golden Guide to Scuba Diving, 1968) 
-
Herman
- VDH Moderator
- Posts: 1317
- Joined: Thu Oct 25, 2007 1:45 pm
- Location: Raleigh NC
Re: I can't screw
What you have is a MK-6. It is a MK5 with a special connection. It is spring loaded to initially close it but when you open the tank, it clamps tighter with the air pressure. To remove it, you close the valve, purge the reg then remove it against the spring pressure.
It might be bound up but you should be able to pull the yoke away from the main body (against spring pressure) enough to get it over a standard valve.
It might be bound up but you should be able to pull the yoke away from the main body (against spring pressure) enough to get it over a standard valve.
Herman
-
ScubaLawyer
- VDH Moderator
- Posts: 1669
- Joined: Thu Apr 08, 2010 11:25 am
- First Name: Mark
- Location: Laguna Beach, CA
Re: I can't screw
Thanks Herman. I knew someone would know.Herman wrote: ↑Sat Sep 22, 2018 6:28 pmWhat you have is a MK-6. It is a MK5 with a special connection. It is spring loaded to initially close it but when you open the tank, it clamps tighter with the air pressure. To remove it, you close the valve, purge the reg then remove it against the spring pressure.
It might be bound up but you should be able to pull the yoke away from the main body (against spring pressure) enough to get it over a standard valve.
"The diver who collects specimens of underwater life has fun and becomes a keen underwater observer. .. seek slow-moving or attached organisms such as corals, starfish, or shelled creatures." (Golden Guide to Scuba Diving, 1968)
-
couv
- Master Diver
- Posts: 453
- Joined: Tue Jul 18, 2006 10:26 pm
Re: I can't screw
I tried to attach a couple of files, but could not due to invalid file extension. (pdf) I'll try to email them to you.
The MK6 is an interesting and unique first stage and a nice collectors item. But I would not do any serious diving with it. I used to have a one. Even after rebuilding it (including the pneumatic yoke) I found it disturbing that I could unseat it with a pull or bump when the tank pressure was below 1000 psi.
The MK6 is an interesting and unique first stage and a nice collectors item. But I would not do any serious diving with it. I used to have a one. Even after rebuilding it (including the pneumatic yoke) I found it disturbing that I could unseat it with a pull or bump when the tank pressure was below 1000 psi.
A sincere THANK YOU to all at VDH who make this wonderful resource available and to all the thoughtful contributors.
-
ScubaLawyer
- VDH Moderator
- Posts: 1669
- Joined: Thu Apr 08, 2010 11:25 am
- First Name: Mark
- Location: Laguna Beach, CA
Re: I can't screw
Good to know! Thanks.
"The diver who collects specimens of underwater life has fun and becomes a keen underwater observer. .. seek slow-moving or attached organisms such as corals, starfish, or shelled creatures." (Golden Guide to Scuba Diving, 1968)
-
antique diver
- Master Diver
- Posts: 2217
- Joined: Sun Dec 10, 2006 12:50 pm
- First Name: Bill
- Location: North-Central Texas
Re: I can't screw
That might be the roughest looking regulator I have ever seen. I don't think you should put that into service with your cave diving kit.
BTW, the subject title made me think you had gotten bent.
BTW, the subject title made me think you had gotten bent.
The older I get the better I was.
-
kworkman
- Master Diver
- Posts: 345
- Joined: Thu Aug 08, 2013 4:17 pm
- First Name: Keith
- Location: Thornville, OH
Re: I can't screw
I remember reading some posts on another forum about several fatalities with this first stage and being the reason they stopped production on it. Even at 3000psi it is easy to disrupt the connection. Cool collector piece. Looks good in my case.
-
rhwestfall
- Master Diver
- Posts: 643
- Joined: Thu Jan 16, 2014 2:34 pm
- First Name: Robert
- Location: "La Grande Ile"
Return to “Vintage Scubapro Regulators”
Who is online
Users browsing this forum: No registered users and 2 guests