Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Post Reply
User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Rene' Sports Advertisement

Sat Dec 05, 2015 3:16 pm

Notice in the photo that the regulator is on the manifold facing out as they originally used it and made the horns curved to work that way....
01 (33).jpg
Rene Sports.JPG
You do not have the required permissions to view the files attached to this post.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
User avatar
antique diver
Master Diver
Posts: 2217
Joined: Sun Dec 10, 2006 12:50 pm
First Name: Bill
Location: North-Central Texas

Re: Rene' Sports Advertisement

Sat Dec 05, 2015 4:23 pm

I think I'd rather let my hood balloon up rather than have that goofy looking flutter valve on my head! :roll:
The older I get the better I was.
User avatar
Bronze06
Master Diver
Posts: 666
Joined: Tue Jul 01, 2014 5:33 am
First Name: Russell
Location: Tabuk, Saudi Arabia

Re: Rene' Sports Advertisement

Wed Dec 09, 2015 7:10 am

Cool observation Bryan, I learned something new today. I am with Antique D on the "Duckbill" head look although I think there are members on the forum that have done this or something very close to it with their vintage style Drysuits.
"Where'd ya get that ol' thang, don't cha' know them thare things ill kill ya!"

Live From the Red Sea,

Russ
User avatar
Britmarine
VDH Moderator
Posts: 270
Joined: Sat Mar 28, 2009 4:52 pm
First Name: David
Location: Newcastle upon Tyne, UK

Re: Rene' Sports Advertisement

Wed Dec 09, 2015 1:34 pm

I love Vane Ivanovic's tongue-in-cheek explanation of the valve worn on the head of drysuited Charles G. Chaplin (No, not that Charles Chaplin :D ) below on page 50 of his 1955 book Modern Spearfishing :
Image

David
User avatar
sitkadiver
Master Diver
Posts: 458
Joined: Wed Jan 26, 2011 11:30 pm
First Name: Dave
Location: Sitka, Alaska

Re: Rene' Sports Advertisement

Thu Dec 10, 2015 7:33 am

So, being a drysuit diver, but not a "vintage" drysuit diver, I have to ask:

Wouldn't the duckbill on the head prevent equalization of the suit, since the suit squeeze was counteracted by blowing air into the suit from the mask skirt?

Or was it that, in a head-down position, you could equalize the suit and in a head-up position, the air would bleed off?
I do not believe in taking unnecessary risks, but a life without risk is not worth living. - Charles Lindbergh
User avatar
luis
VDH Moderator
Posts: 1751
Joined: Thu Jun 30, 2005 9:28 pm
First Name: Luis
Location: Maine

Re: Rene' Sports Advertisement

Thu Dec 10, 2015 8:35 pm

sitkadiver wrote: So, being a drysuit diver, but not a "vintage" drysuit diver, I have to ask:

Wouldn't the duckbill on the head prevent equalization of the suit, since the suit squeeze was counteracted by blowing air into the suit from the mask skirt?

Or was it that, in a head-down position, you could equalize the suit and in a head-up position, the air would bleed off?
I am fairly sure the bold is the correct answer.

I never used that particular type of suit, but I have tried a Russian frogmen suit with a similar valve placement and that is how it worked, but it did have a bit more control.

I have also seen pictures of a similar suit (with a duckbill on the hood) and it looked like the diver had tied an elastic around the duckbill to add some resistance. I can't remember where I saw the picture, but there was nothing on the associated text explaining anything on that subject.
Luis

Buceador con escafandra autónoma clásica.
Post Reply

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 32 guests