Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Post Reply
User avatar
Greg Barlow
VDH Moderator
Posts: 525
Joined: Wed Jul 20, 2005 1:26 pm
First Name: Greg
Location: SW Ohio

Voit 50 Fathom HP valve

Sat Mar 03, 2007 9:22 pm

Has anyone ever replaced the soft seat in their Voit 50 Fathom reg? Looking at the valve stem assembly, it looks like it wouldn't be an overly difficult part to reproduce. Considering that it is a downstream valve, I would think that the material durometer and material would be similar to that used on a DA second stage poppet seat.

Greg Barlow
Greg Barlow
PADI Assistant Instructor
TDI Adv. EAN
TDI Decompression Procedures
IANTD Full Cave
NSS/CDS Full Cave
User avatar
YankDownUnder
Master Diver
Posts: 376
Joined: Fri Jul 29, 2005 6:42 pm
Location: Melbourne, Australia
Contact: Website

Sun Mar 04, 2007 4:53 pm

It probably is a DA second stage, as U.S. Divers made Voit's regulators.
SeaHuntJerry
Master Diver
Posts: 427
Joined: Sat Jul 02, 2005 12:45 am
Location: Minneapolis

Fifty fathom seat

Mon Mar 05, 2007 12:15 am

Hi Greg,
I had a seat turned down flat on a lathe.
Jerry
User avatar
Greg Barlow
VDH Moderator
Posts: 525
Joined: Wed Jul 20, 2005 1:26 pm
First Name: Greg
Location: SW Ohio

Mon Mar 05, 2007 5:46 pm

YankDownUnder wrote:It probably is a DA second stage, as U.S. Divers made Voit's regulators.
The 50 Fathom is a downstream valve assembly. It is unique to Voit, as US Divers never sold a model using the mechanism.

Greg
Greg Barlow
PADI Assistant Instructor
TDI Adv. EAN
TDI Decompression Procedures
IANTD Full Cave
NSS/CDS Full Cave
User avatar
Greg Barlow
VDH Moderator
Posts: 525
Joined: Wed Jul 20, 2005 1:26 pm
First Name: Greg
Location: SW Ohio

Re: Fifty fathom seat

Mon Mar 05, 2007 5:48 pm

SeaHuntJerry wrote:Hi Greg,
I had a seat turned down flat on a lathe.
Jerry
Jerry,

Did you have a new stem and retainer made, or the soft material refaced?

Greg
Greg Barlow
PADI Assistant Instructor
TDI Adv. EAN
TDI Decompression Procedures
IANTD Full Cave
NSS/CDS Full Cave
ovalis
Master Diver
Posts: 186
Joined: Thu May 11, 2006 2:48 pm
Location: Southern California

Mon Mar 05, 2007 6:29 pm

Hi Greg,

I have an extra seat if you need one. You had me a little confused about the soft material of the seat, because my seats are pretty hard like a DA high pressure seat.

Mike
User avatar
Greg Barlow
VDH Moderator
Posts: 525
Joined: Wed Jul 20, 2005 1:26 pm
First Name: Greg
Location: SW Ohio

Tue Mar 06, 2007 1:27 pm

ovalis wrote:Hi Greg,

I have an extra seat if you need one. You had me a little confused about the soft material of the seat, because my seats are pretty hard like a DA high pressure seat.

Mike
Mike,

If I could borrow it for a few weeks to have engineering specs drawn up on it it would help a lot. I am going to check to see how much it would cost to reproduce them. I need to check the soft seat's durometer to see if a compartible material is available.

BTW, any luck in getting the 1976 catalog scanned?

Thanks.

Greg
Greg Barlow
PADI Assistant Instructor
TDI Adv. EAN
TDI Decompression Procedures
IANTD Full Cave
NSS/CDS Full Cave
ovalis
Master Diver
Posts: 186
Joined: Thu May 11, 2006 2:48 pm
Location: Southern California

Tue Mar 06, 2007 3:25 pm

Greg,

No problem on the seat, but let me know if your seat is softer than mine.

I'll email you regarding it.

I haven't got the 76 catalog scanned yet, but maybe by the end of this week.

Mike
Post Reply

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 44 guests