I just received a complete La Spirotechnique Mistal Narguile, but without the manual.
Can any body help me out wit a copy of the manual or most important, the correct setting of the pressure delivered from the reduction valve at the surface.
There is a red dot marking at 15 bar, but is it the pressure the assistant at the surface shall obtain at all time?
Regards
Sniox
Pressure setting at surface air supply?
Moderators: captain, simonbeans
Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
-
Sniox
- Master Diver
- Posts: 104
- Joined: Tue Oct 25, 2005 9:20 am
- Location: Copenhagen / Denmark
Pressure setting at surface air supply?
You do not have the required permissions to view the files attached to this post.
-
1stab
- Lung Diver
- Posts: 64
- Joined: Sat Nov 12, 2005 2:05 am
- Location: NYC
That's a beautiful setup you have. I've just recently submitted pdf's on "Building your own hookah" and "improving your rig." You might find some information in "improving your rig" that you can apply to your setup. These pdf's are in the download section of this site.
Diving like back when toilets used to really flush, styrofoam was non-existant in a car, and seltzer water wasn't so damn expensive.
Return to “Classic Vintage Diving”
Who is online
Users browsing this forum: No registered users and 33 guests