Conshelf Pins
Moderators: captain, simonbeans
Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
-
Subguy
- Diver
- Posts: 18
- Joined: Thu Dec 19, 2013 4:23 pm
- First Name: Jeff
- Location: BC Canada
Conshelf Pins
Hi All – First time chiming in on the forum. Nice to see that you guys have gone to such superhuman effort to find and manufacture replacement parts. Well done! Just curious, when using the Conshelf Seats and pins in the RAM as you suggest, there is mention of making sure the pin is trimmed to proper length. Can anyone tell me what the magic length is? Any feedback appreciated. Thanks in advance.
-
EHowe
- Master Diver
- Posts: 210
- Joined: Sun Aug 28, 2011 2:59 pm
- First Name: Edward
- Location: Chicago
Re: Conshelf Pins
The approximate pin length required for the new HP seats is around 0.635" according to the measurements I took a while back.
As per Luis. Worked perfect in my RAM project.
As per Luis. Worked perfect in my RAM project.
-
Subguy
- Diver
- Posts: 18
- Joined: Thu Dec 19, 2013 4:23 pm
- First Name: Jeff
- Location: BC Canada
Re: Conshelf Pins
Thanks EHowe, much appreciated!
Return to “Classic Vintage Diving”
Who is online
Users browsing this forum: No registered users and 34 guests