Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Post Reply
BROXTON CHUCK

Thu Jul 07, 2005 9:22 am

It is great to see ALLANS swell harness on the vintagedoublehose page! Allan restored several original harness sets for me, and they are as good or better than the originals. Count on him for a super job. Broxton Chuck
User avatar
1969ivan1
Plank Owner
Posts: 1657
Joined: Sat Jun 25, 2005 12:15 pm
First Name: rob
Location: CINCINNATI, OHIO

Thu Jul 07, 2005 9:23 am

Allan aka Simmonbeans made me a repo harness for a set of doubles bands and let me just say this!!!!!
THEY ARE BETTER THAN THE ORIG!!!!! Allan does top notch work! He is a Czech after all. :D
User avatar
simonbeans
VDH Moderator
Posts: 1055
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Thu Jul 07, 2005 10:24 am

Now back to my original post. Technical difficulties, you know. Anyway, I was able to get good copies of original bands made in stainless steel. I have made harnesses in USD blue which, fortunately, were very close to the original. I have had inquiries into a reproduction of a Voit harness which was green. Does anyone know what this green looks like? I would appreciate any information if you can give me an idea. Thanks.
Allan
Image
Image
User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Fri Jul 08, 2005 2:28 pm

Allan, could you make a harness for the set of 30cf doubles that I have? I could send you another set of bands. Do you have the facility to cut the holes in the stainless where the webbing goes ?
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
User avatar
simonbeans
VDH Moderator
Posts: 1055
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Fri Jul 08, 2005 3:21 pm

Definitely love to make it. I have a guy who can cut the slots, but he isn't the least expensive. The new bands for the single 72s had the slots cut by laser when the bands were made, so that was no problem as they were flat stock. With your double bands curved already, it may be an issue. but then I would have to ask him. Like I said he isn't cheap, he charged me $40 for my first harness I made before the new bands. Maybe you can find someone locally who can cut them. My guy used a mill.
BROXTON CHUCK

Thu Jul 21, 2005 10:43 am

I just saw the VOIT GREEN vintage repro harness from ALLEN K. And it is a perfect color match to the original foil "VOIT" sticker on his 1955 tank. What a honey!! His new bands are great too. Im ordering two sets. Nothing but the best. Chucko
SeaHuntJerry
Master Diver
Posts: 427
Joined: Sat Jul 02, 2005 12:45 am
Location: Minneapolis

green Voit bands

Fri Jul 22, 2005 10:45 pm

Hi Broxton Chuck,
Would you please give me the link to allan's bands.
Thanks again,sorry you cannot make Wayzee,someone said the Kemp's Cow scooter and the junior calf scooter of Mike folliet may show up there.
Jerry :P 8) :lol:
User avatar
pearldiver
Vintage Diver
Posts: 81
Joined: Sat Jul 02, 2005 12:45 am
Location: Rockton, IL Near of course Pearl Lake

Mon Aug 15, 2005 9:50 pm

Allen,
Do you have any of that cotton webbing to make a new weight belt for me? My old one is a bit frayed. I have the little one pound weights.
Gayle
User avatar
simonbeans
VDH Moderator
Posts: 1055
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Mon Aug 15, 2005 10:29 pm

At this time I have only the 1" webbing for the harnesses and some 2" that I double for the shoulder pads. I wish I could get the thick 2" that was used on the weight belts. Sorry.
Allan
User avatar
pearldiver
Vintage Diver
Posts: 81
Joined: Sat Jul 02, 2005 12:45 am
Location: Rockton, IL Near of course Pearl Lake

Tue Aug 16, 2005 3:56 pm

Allen,
That is what I need> The one inch webbing. Do you have some to spare for a weight belt? I have the ancient tiny weights with the one inch slots and a D-Ring belt closure. Grey color is fine if you have any extra to spare. If not, that's ok......But let me know if you get any more in later. Thanks... Gayle
User avatar
simonbeans
VDH Moderator
Posts: 1055
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Tue Aug 16, 2005 6:23 pm

Email me directly through this forum. I can definitely supply you with the 1" material. I can dye it for you or you can dye it yourself. Let me know how much you need.
Allan
User avatar
Bob3
Diver
Posts: 21
Joined: Fri May 12, 2006 2:24 pm
Location: Migratory; CA at present
Contact: Website

speaking of voit stickers

Tue Jan 23, 2007 8:01 pm

Speaking of Voit stickers, is someone here having some made?

I know someone with an old Voit tank, white vinyl coated variety & it could use a new sticker.
Your Friendly Northern California Viking/Poseidon Drysuit Dealer
shackle
Diver
Posts: 22
Joined: Tue Nov 28, 2006 3:30 pm
Location: Chattanooga, Tn.

Tue Jan 23, 2007 8:34 pm

PM mail kghring on this forum or go to " other labels" on the main page of the VDH site. Karl makes quality repro labels.
Post Reply

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 30 guests