I have a couple Tabata TR-30 first stages that need to be rebuilt. Does anyone have any idea if they match up to a Scubapro reg or if there are rebuild kits that will work.
Thanks
Kevin
Moderator: Greg Barlow
couv wrote:You could probably get most of the service parts from a MK5 or MK10 service kit. If the hp seat is not compatible, one could most likely be found in the Trident catalog. This website has a phone number for Tabata USA at the bottom:
http://www.tmx4me.com/sales/sal-ac01.htm
Good luck, and keep us posted (with pictures if possible.) I'm looking forward to your update.klauricella wrote:couv wrote:You could probably get most of the service parts from a MK5 or MK10 service kit. If the hp seat is not compatible, one could most likely be found in the Trident catalog. This website has a phone number for Tabata USA at the bottom:
http://www.tmx4me.com/sales/sal-ac01.htm
Thanks I was thinking they where close but couldn't find any info on this particular regulator. I have a Mk5 rebuild kit and just ordered a couple Mk10 kits so will pull apart and see what it looks like.
Kevin
What Luis said...luis wrote:The piston looks more like the old US Divers Calypso IV from the 70's.
There's no reason to take apart your other regs-unless you just want to. Clean, lube, replace the seals and seat on your Tabata and put an IP gauge on it to make sure the pressure is correct and stable. Post a picture of the hp soft seat with dimensions if possible.klauricella wrote:I have a US Divers Calypso J and a Calypso Supreme would these be the same as the Calypso IV. Hate to take apart if they are completly different.
Thanks
Kevin
Return to “Single Hose Regulators.”
Users browsing this forum: No registered users and 9 guests