Customer sent me an E-mail about his sticker label Royal that has clips on it....He said he had read somewhere that sticker labels never had clips from the factory and wanted to know if I could install them so the regulator would be period correct....
Once again, information on the web is incorrect.....He didn't reference the source but they are wrong.... Below are images from 70's era USD catalogs clearly showing circle or sticker label regulator with clips.....One thing we have figured out about USD is that there are very few absolutes when it comes to double hose regulators....They never threw parts away and if they had parts available they probably used them on something.
I'm 99.9999% sure the regulator he has left USD with clips on it.....I hate clips but they were correct for thousands of regulators...
70's era round label clips
Moderators: captain, simonbeans
Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
-
Bryan
- Plank Owner
- Posts: 5279
- Joined: Fri Jun 24, 2005 11:40 am
- First Name: Bryan
- Location: Wesley Chapel Florida
- Contact: Website
70's era round label clips
You do not have the required permissions to view the files attached to this post.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
-
8dust
- Master Diver
- Posts: 555
- Joined: Wed Aug 05, 2009 11:39 am
- Location: Nashville's North Shore
Re: 70's era round label clips
Were the USD band clamps chrome plated brass with a nut? plated steel? or SS with threads? or something else?
I don't believe I've seen an OEM one from USD, just your repros.
I don't believe I've seen an OEM one from USD, just your repros.
Freddo
NAVED member #201
NAVED member #201
-
Bryan
- Plank Owner
- Posts: 5279
- Joined: Fri Jun 24, 2005 11:40 am
- First Name: Bryan
- Location: Wesley Chapel Florida
- Contact: Website
Re: 70's era round label clips
Chrome plated steel with a captive panel nut.
Sent from my SGH-T989 using Tapatalk
Sent from my SGH-T989 using Tapatalk
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
-
captain
- Plank Owner
- Posts: 1440
- Joined: Mon Jul 04, 2005 11:32 am
- Location: LaPlace, LA
Re: 70's era round label clips
I sold USD stuff from 1967 to 1972, I never saw a double hose come through the shop with a band clamp.
Captain
-
Ron
- Site Admin
- Posts: 1760
- Joined: Mon Oct 20, 2008 5:51 pm
- First Name: Ron
- Location: Puget Sound, Washington
- Contact: Website
Re: 70's era round label clips
Captain Tom is supported by the catalogs as well. The band clamp has, to my knowledge, been listed only as an option in the USD catalogs. It first appeared in the middle-late 1950's.
The impossible missions are the only ones which succeed. -JYC
-
luis
- VDH Moderator
- Posts: 1751
- Joined: Thu Jun 30, 2005 9:28 pm
- First Name: Luis
- Location: Maine
Re: 70's era round label clips
My 1971 round label RAM has a chrome plated brass band clamp with a press in panel nut. I believe the nut is stainless, but from what I can see the band is brass (there is also nothing magnetic in it, I can see a bit of yellow/ gold where the chrome is compromised and I have cleaned verdigris in the past).
The band clamp came with the regulator when I bought it (in 71).
In PR we only sold a few DH between 1971 and 1973. They all came with band clamps. I don't know if it was an option. I didn't do the ordering... I just sold them. I don't think it was listed as an option.
The band clamp came with the regulator when I bought it (in 71).
In PR we only sold a few DH between 1971 and 1973. They all came with band clamps. I don't know if it was an option. I didn't do the ordering... I just sold them. I don't think it was listed as an option.
Luis
Buceador con escafandra autónoma clásica.
Buceador con escafandra autónoma clásica.
-
Bryan
- Plank Owner
- Posts: 5279
- Joined: Fri Jun 24, 2005 11:40 am
- First Name: Bryan
- Location: Wesley Chapel Florida
- Contact: Website
Re: 70's era round label clips
Band clamp ring vary in finish and plating quality. I have seen really great ones and some with the finish flaking off....kinda like regulators varied over the years in the same way. LaSpirotechnique clamp rings are the toughest and most well made in my opinion but would cost a fortune to duplicate in small quantities.
As it is now I have to buy 1000 at a time to get stainless in a price everyone can live with.
As it is now I have to buy 1000 at a time to get stainless in a price everyone can live with.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
-
swimjim
- Master Diver
- Posts: 1710
- Joined: Thu Mar 23, 2006 12:28 am
- First Name: Jim
- Location: Belgium WI
Re: 70's era round label clips
I bought a round label Aquamaster in June and it definitely had C-clips on it. It's got a band clamp now though! Hope to dive it on Sunday......
-
Ron
- Site Admin
- Posts: 1760
- Joined: Mon Oct 20, 2008 5:51 pm
- First Name: Ron
- Location: Puget Sound, Washington
- Contact: Website
Re: 70's era round label clips
My RAM is a round label and it had C clips on it as well. Mine was also in its original box when I got it. I have since put a band clamp and heavy yoke on it, as it had the tire yoke originally.
The impossible missions are the only ones which succeed. -JYC
Return to “Classic Vintage Diving”
Who is online
Users browsing this forum: No registered users and 33 guests