Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
User avatar
YankDownUnder
Master Diver
Posts: 376
Joined: Fri Jul 29, 2005 6:42 pm
Location: Melbourne, Australia
Contact: Website

Mon May 14, 2007 6:18 am

Another set of triples: http://cgi.ebay.com/Vintage-scuba-Nemro ... dZViewItem

This set is in Canada and looks good.

User avatar
1969ivan1
Plank Owner
Posts: 1657
Joined: Sat Jun 25, 2005 12:15 pm
First Name: rob
Location: CINCINNATI, OHIO

Mon May 14, 2007 1:53 pm

Yes they do Steve, but I am not too sure about that price? I have been suprised before at the sale price of this gear, but I don't think he will get a buyer. While they do look super cool, none look as cool as those triples you have. :shock:

User avatar
JES
Plank Owner
Posts: 1341
Joined: Sat Jun 25, 2005 11:23 pm
First Name: Joseph
Location: Fleming Island, FL

Mon May 14, 2007 5:52 pm

This is a very nice set of Nemrod triples, I wouldn't be suprised if the seller actually got a buyer. There seems to be a lot interest in triples. 8)
NAVED Master Diver #108
'Anima Sana In Corpore Sano’

standingup

Mon May 14, 2007 7:10 pm

YankDownUnder those triple tanks you have are really sharp. Did you paint the blue- I don't remember seeing blue just galvanized and yellow. Also any idea what size (cubic foot) the triples usually are. And last question- the tanks with feet or nubs on the bottom ( instead of the round bottoms) were extinguisher tanks right ?

User avatar
YankDownUnder
Master Diver
Posts: 376
Joined: Fri Jul 29, 2005 6:42 pm
Location: Melbourne, Australia
Contact: Website

Wed May 16, 2007 4:15 am

Nemrod was marketed in the USA by Seamless Rubber Company. Seamless bought 1800 psi tanks which had been designed to be fire extinguishers. They were not fire extiguisher tanks and then used as scuba, as the marking denote. CO2 solidifies at 1800 psi, so a greater pressure rating is not needed. Low pressure tanks were common so the 1800 psi was okay for the period. They have the toes to allow them to stand up.

My triples, seen in the avitar, are 1954 Broxton 44 cu ft tanks, with a working pressure of 2600 psi. They came hot dip galvanized. They looked bad after 25 years in my mother's basement and I could not get Naval Jelly needed to restore their original look. Some things are hard to find in Australia and that is one of them. I sprayed galvanized (zinc) paint on them and then covered them with grey spray paint.

You can get Naval Jelly at Home Base and other large hardware stores. It will make your galvanized tanks look like new. Use gloves and eye protection and have water handy. Use your wife's stainless steel kitchen sink, when she is out and won't catch you. Cap the tank, and don't let the stuff inside. The dark color will return, so you will need to seal the tank to keep the new look. In any case the patina that returns, will usually look better than the way most old tanks appear. Good Luck.

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 50 guests