Sorry for another newbie question, but I'm a newbie.
Anyway, I picked up a Healthways Gold Label that was in excellent condition except for the inside of the valve body, which had a a fair amount of verdigris on in it. I disassembled it, and cleaned it up, along with all the internals.
My problem is this. On the diagram I have,it appears that the valve seat is removable and has an o-ring on it. To remove the actuating pin, you first have to remove the valve seat.
How does the valve seat come out? Is it just pressed out from the other side by the actuating pin? I'd hate to use force if it isn't required.
Healthways Gold Label Scuba
Moderators: captain, simonbeans
Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
-
kombiguy
- Diver
- Posts: 16
- Joined: Tue May 06, 2014 8:48 am
- First Name: Chris
- Location: Palmetto Bay Florida
-
kworkman
- Master Diver
- Posts: 345
- Joined: Thu Aug 08, 2013 4:17 pm
- First Name: Keith
- Location: Thornville, OH
Re: Healthways Gold Label Scuba
I used my brass pick. It has a plastic handle and used the plastic end and just pushed it out from the bottom. Some guys use the eraser end of a pencil. I just did it to mine because I forgot about it.
-
Ron
- Site Admin
- Posts: 1760
- Joined: Mon Oct 20, 2008 5:51 pm
- First Name: Ron
- Location: Puget Sound, Washington
- Contact: Website
Re: Healthways Gold Label Scuba
That same method that Keith uses works great on almost all removable orifices.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
The impossible missions are the only ones which succeed. -JYC
Return to “Classic Vintage Diving”
Who is online
Users browsing this forum: No registered users and 21 guests