Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Post Reply
User avatar
Gilldiver
Master Diver
Posts: 273
Joined: Thu Feb 22, 2007 1:29 pm

Tue Nov 25, 2008 12:32 pm

I have just about decided to use a 200 bar H-valve with my single stages. Of course, I will have a vintage single hose on the H.

FYI, the H-valve has to be 200 bar on the mount for the single stage if you want to get a short yoke onto it. My Mistral, DW Airstream, and Voit Polaris all will fit on a Thermo 200 bar post, but it is tight.

When you get to the resort, just ask to drain a tank and put your valve on "your" tank.
Double Hose Regulators, It not just a Hobby, it’s a Disease
User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Tue Nov 25, 2008 1:39 pm

Gilldiver wrote:When you get to the resort, just ask to drain a tank and put your valve on "your" tank.
How often has a resort done this?
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
User avatar
usddude
Master Diver
Posts: 317
Joined: Wed Jan 30, 2008 2:17 am
Location: Tennessee

Tue Nov 25, 2008 6:58 pm

Be careful with those yokes. Look closely at that Calypso because it may not be a long yoke. It may have been switched out with a short one already :evil:
Post Reply

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 53 guests