Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
Post Reply
User avatar
Robohips77
Master Diver
Posts: 814
Joined: Mon Jul 17, 2006 5:26 pm
Location: Southwest in the Buckeye State

Glue? Wetsuit Cement?

Sat Jul 07, 2007 9:03 am

Ok I found a great condition nemrod horse collar with the original pony tank in geat condition and want to do some preventative maitenance. The oral inflator hose looks as though it has some stress on the elbow coming out of the BC but I have never seen the type of glue used on it. It still appears to be well carterized but there is some glue peeling off. Is it regualar wet suit cement or something different? I am being picky as I don't want to damage the material of the BC. This was a keeper as it only needs to be cleaned a little and the pony bottle is immaculate inside. Still had original air in it. Whoo what a smell! thanks for your time.
User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Sat Jul 07, 2007 10:40 am

Is it the rubber type like the Fenzy? If so I have used Aqua-Seal on them and had good results.......Luis has a lot of experience with them, perhaps he has a better suggestion...
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
User avatar
Robohips77
Master Diver
Posts: 814
Joined: Mon Jul 17, 2006 5:26 pm
Location: Southwest in the Buckeye State

aquaseal and cotol 240

Thu Jul 19, 2007 5:36 pm

Bryan, thanks the aquaseal and cutting it 50/50 with cotol 240 for faster set up worked just great. Integrity of the BCD still looks good also. thanks for the hlep.
Post Reply

Return to “Classic Vintage Diving”

Who is online

Users browsing this forum: No registered users and 49 guests