New Member
Posts: 5
Joined: Fri Jul 31, 2020 11:13 am
First Name: dennis

kraken convert DIN to yoke

Sun Aug 23, 2020 11:53 am

i have a 2019 model kraken DIN, i would like to convert it back to yoke (i dont want to use an adapter) does anyone know what brand yoke will work?

User avatar
VDH Moderator
Posts: 1666
Joined: Thu Jun 30, 2005 9:28 pm
First Name: Luis
Location: Maine

Re: kraken convert DIN to yoke

Sun Aug 23, 2020 9:20 pm

The newer Argonaut use the metric threads. I would first ask Bryan, he may be able to help you.

If Bryan can not help at this point, I know Mares uses the same yoke nut threads, but I am not sure which model yoke or yoke nut would fit best.

There may be other brand names, but I don't know.

Good luck

Buceador con escafandra autónoma clásica.

User avatar
Greg Barlow
VDH Moderator
Posts: 510
Joined: Wed Jul 20, 2005 1:26 pm
First Name: Greg
Location: SW Ohio

Re: kraken convert DIN to yoke

Tue Aug 25, 2020 7:13 pm

I do have a Mares yoke, yoke nut, and yoke screw. They are in excellent condition, as they came off of a Mares regulator that I converted over to DIN. I did try the Argonaut yoke screw, and it is the proper thread size. I did not try the yoke nut, but as Luis, has indicated, it is the same thread size. If you are interested in the set, let me know through my email at [email protected]. I can send you photos through an email.

Greg Barlow
PADI Assistant Instructor
TDI Decompression Procedures
IANTD Full Cave
NSS/CDS Full Cave

Return to “Phoenix and Argonaut Specialty Area”

Who is online

Users browsing this forum: No registered users and 7 guests