Nemrod Silver Snark III

Dedicated to the discussion of vintage diving methods and equipment available prior to 1970. This forum section is limited to the diving without modern BCDs or use of an Octopus.

Moderators: simonbeans, captain

Forum rules
Discussion of diving methods and equipment available prior to the development of BCDs beyond the horse collar. This forum is dedicated to the pre-1970 diving.
User avatar
Master Diver
Posts: 176
Joined: Tue Nov 05, 2013 1:30 pm
Location: Lafayette, LA

Nemrod Silver Snark III

Tue Feb 14, 2017 12:14 pm

Have located a Snark III Silver edition that is in need of tender loving care. Anyone have an idea on where to get parts? Bryan, do you have access to parts for this regulator or can you recommend a source?


User avatar
Plank Owner
Posts: 4976
Joined: Fri Jun 24, 2005 11:40 am
Location: Wesley Chapel Florida

Re: Nemrod Silver Snark III

Tue Feb 14, 2017 12:42 pm

Try Here
You do not have the required permissions to view the files attached to this post.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

User avatar
Master Diver
Posts: 548
Joined: Tue Jul 01, 2014 5:33 am
Location: Tabuk, Saudi Arabia

Re: Nemrod Silver Snark III

Fri Feb 17, 2017 5:36 am


Rob over at the Scubamuseum has some second stage NOS seats still, I believe. ... ort=normal

I know that you can use a USD main diaphragm in the can housing. IP adjustment can be a pain IF you don't have an adapter for the Overpressure Relief Valve (ORV) port as it is a metric thread. I have set mine at 130. Great regs that are well built. For any extra parts you might want to check some of the European dive boards.
"Where'd ya get that ol' thang, don't cha' know them thare things ill kill ya!"

Live From the Red Sea,


Return to Classic Vintage Diving

Who is online

Users browsing this forum: No registered users and 3 guests