User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: DIN Cover Fell Off During Fresh Water Rinse

Tue Sep 28, 2021 6:21 pm

Fresh water.....I'll pull the port plugs, bleed some air out, put the plugs back in, pressurize. take a few breaths, check IP and if all is good there, Go Diving. Like it's predecessors, the Argonaut Kraken mechanicals are as tough as nails. Leave the panic to the porcelain Jesus regulator owners. Luis knew what he was doing when he designed it the way he did.
I have serviced Argonaut Kraken regulators that has more salt water in them than the Pacific and were still working fine. The only reason they were sent to me for service is cause the IP started to creep causing the 2nd stage to free flow slightly.
JMO and observation is that most DIN caps are garbage. Unless the O-ring seals flat against the face of the 1st stage they leak like screen doors on submarines.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

Return to “Phoenix and Argonaut Specialty Area”

Who is online

Users browsing this forum: No registered users and 8 guests