Page 2 of 2
Re: Another UDS-1 triples unit saved and ready to dive
Posted: Mon Aug 14, 2017 2:35 pm
by SheriffDiver
For the record, I used 8 pounds of soft weights inside the housing at the top of the unit when worn. This weight keeps the unit on your back and not wanting to ride upwards. I used no other weights other than inside the housing. The wetsuit I'm wearing is custom made to look like it's from 1974. It is a 5 mm thick wetsuit.
Re: Another UDS-1 triples unit saved and ready to dive
Posted: Sat Aug 19, 2017 4:29 pm
by SheriffDiver
This is the problem child with these units. This is the one way valve on the end of the fill hose. There is a Schrader valve in there with an o-ring sealing it inside that fitting. This is a 4,000 psi Schrader valve I got off of eBay that is used in Racing applications.
Re: Another UDS-1 triples unit saved and ready to dive
Posted: Sat Aug 19, 2017 4:31 pm
by SheriffDiver
4,000 psi Schrader valve on left. Normal off the counter Schrader valve on right.
Re: Another UDS-1 triples unit saved and ready to dive
Posted: Thu Aug 24, 2017 12:26 pm
by SheriffDiver
2 Working UDS-1 units ready to dive after Alan made new harnesses for both.
Re: Another UDS-1 triples unit saved and ready to dive
Posted: Thu Aug 24, 2017 5:58 pm
by SeaHuntJerry
Wow two complete units to be Proud of!
