This is a Scubapro convertible valve that was used on some Scubapro tanks and one of my Coyne steel 80 cu ft tanks. I found it not compatible with the Argonaut Krakken yoke.
hmmmm... that wasn't my experience....slonda828 wrote:The XS scuba manifold, and the individual valves when used as singles valves, will not work with the kraken yoke unless you change the knobs out. The new vindicator knobs that come standard on all XS Scuba valves extend too close to the valve face and sit under the yoke when you attempt to mount it.
I have cropped some images of the tank valves from last years trip.Bryan wrote:We are still working on it....What valves are they using?
Bryan wrote:I should have a solution for you by mid September. Luis and Herman have done their part and now it's up to me to get the process and finish correct. For now you can use a standard Conshelf XIV yoke. Should be pretty easy to come by even in the UK. We ran across a Scubapro valve on a cylinder in Canada last month and put a Conshelf yoke on the Argonaut and it worked fine.
Sent from my SGH-T989 using TapatalkBryan wrote:I cant guarantee any yoke will fit every cylinder valve produced worldwide. I'm doing the best I can with the limited information I have available on valves used overseas.
Sent from my SGH-T989 using Tapatalk
Users browsing this forum: No registered users and 34 guests