Page 1 of 1

Compressor and filter setup pics

Posted: Thu Oct 01, 2020 9:41 pm
by hunterkz
Here is my compressor setup with filter towers. The big one is a Luchard H6 220v and the other is a Cornelius 130r1500. Both work great but the Luchard is much faster. The Cornelius is mainly used as a portable and hopefully will be used on a sailboat when I retire and cruise the Caribbean ocean. Notice the custom sticker on the luchard. I'll post another of the filter tower as it didn't work this time.
cyclone front.jpg

Re: Compressor and filter setup pics

Posted: Thu Oct 01, 2020 9:59 pm
by hunterkz
Here is the filter system. It is a China made oil/water separator with a aircraft hydraulic accumulator used to house a Lawrence factor filter. It has a Non return valve on the filter inlet and a PMV on the filter outlet set at 2100 psi. I had to mill some Delrin to adapt the filter air tight into the housing and had a hydraulic shop make up the hoses. The fill whip is a paintball one but I have a better one and am just waiting for adapters and a hose. It works well and I get zero water when I blow down the filter. The Cornelius compressor already has a oil water separator on it but I may add it to the rack just for extra protection in the future.