Here is the filter system. It is a China made oil/water separator with a aircraft hydraulic accumulator used to house a Lawrence factor filter. It has a Non return valve on the filter inlet and a PMV on the filter outlet set at 2100 psi. I had to mill some Delrin to adapt the filter air tight into the housing and had a hydraulic shop make up the hoses. The fill whip is a paintball one but I have a better one and am just waiting for adapters and a hose. It works well and I get zero water when I blow down the filter. The Cornelius compressor already has a oil water separator on it but I may add it to the rack just for extra protection in the future.
You do not have the required permissions to view the files attached to this post.