Vintage Double Hose

Just acquired a real minty Drager PA61. This should not be confused with the PA61-I or PA61-II both of which had a different mouth pieces and in the case of the PA61-II a two stage system. The PA 61 in the configuration I have has a US style reg yoke and hoses that are identical dimensionally to either Voit or USD hoses and the mouth piece is a dead ringer as well but has "Drager" on it rather than Voit or USD. Obviously this reg was dedicated to the US market (as most were DIN by 65 in Europe and were of the PA61-I configuration for that market) and geared for the hoses and diaphragms available to dive shops in the US making for easy parts interchangeability. By 1966 Drager attempted to challenge both USD, VOIT and Spriotechnique as a viable and "Higher" quality alternative to what was available here in the US. Known for quality, when marketed here, the company received good reviews but due to the price lost market share to the already well established (and cheaper by price) companies in the US and eventually focused on commercial and technical rigs. As a kid I remember divers saying if you wanted the very best you got a German Drager.
This one still has its factory lead inspection seal on it. The green hoses have definitely taken a set, but are in "diveable" condition. I wanted you all to see it before it gets rebuilt. I believe some of Robs green Voit hoses will fill the bill here as I do not desire to dive the originals, but probably will anyway. If anyone has every rebuilt one please feel free to fill me in on any peccadillos I might run into. I am sure it would be very similar to a Mistral in most respects.

Here's a Cool German Vintage Gear Website with English and French translation capability.

http://www.seveke.de/tauchen/technik/2komp-pa612.htm

That's a neat regulator Russ. Thanks for sharing.

Looks like it's in great shape.

It is really cherry. Hooked it up to 3000psi and breaths but breaths slow and hard. Definitely hasn't seen service for 30 or more years. Should be fun.

Evidently after reading up a bit more, what I have is the PA61 B, which was made for export.