tall78
Diver
Posts: 14
Joined: Fri Jul 06, 2012 1:50 pm
First Name: Louis
Location: Indiana

Argonaut Configuration

Sun Sep 13, 2015 4:32 am

Receive my new Kracken. Looks great, except I don't know what ports are what. Some please post a diagram of what ports are high and low pressure, my reg is not marked.

User avatar
Herman
VDH Moderator
Posts: 1315
Joined: Thu Oct 25, 2007 1:45 pm
Location: Raleigh NC

Re: Argonaut Configuration

Sun Sep 13, 2015 7:14 am

I don't have a photo on hand but it's easy. The end port opposite the orifice adjustment (slot with the 3 dots around the hole) is the HP port, all the rest are low pressure. Also, the HP port is the modern standard 7/16 so any LP hose you try to put in it will just fall out. The rest of the ports are the modern standard 3/8.
Herman

User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Argonaut Configuration

Sun Sep 13, 2015 2:51 pm

Picture
You do not have the required permissions to view the files attached to this post.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

tall78
Diver
Posts: 14
Joined: Fri Jul 06, 2012 1:50 pm
First Name: Louis
Location: Indiana

Re: Argonaut Configuration

Sun Sep 13, 2015 9:08 pm

Thanks guys, makes thing easier. Didn't want to screw up such a wonderful piece of equipment.

Return to “Phoenix and Argonaut Specialty Area”

Who is online

Users browsing this forum: No registered users and 45 guests