Page 1 of 1
Phoenix set up
Posted: Wed Jun 04, 2014 10:49 am
by gregf
Got my new Phoenix and HPR last week and they are awesome. I set the IP to about 140 and it breathes nice. There is a leak somewhere because the IP pressure drops when I shut off the tank valve. Can't hear it. Question: 3 washers came with it- the thin red one and 2 clear ones. Should I have used all 3 on the Phoenix? My DAAM only had the single red one. Any advice would be welcome. Thanks
Re: Phoenix set up
Posted: Wed Jun 04, 2014 10:52 am
by gregf
OK, I'm a dummy. The connection to the hookah port was loose. Still wonder about the washers though.
Re: Phoenix set up
Posted: Wed Jun 04, 2014 11:18 am
by Bryan
Good information to review on Phoenix first stage setup.
CLICK HERE
Re: Phoenix set up
Posted: Wed Jun 04, 2014 11:23 am
by gregf
Thanks, Bryan. Don't know how I missed that before. Diving the reg Sunday.
Re: Phoenix set up
Posted: Sun Aug 03, 2014 4:55 am
by Bronze06
Thanks for all the great info on this post. I will be building my own here In Saudi Arabia in about a week. This forum is a Godsend of information. Bryan you are the Man.