Phoenix set up

Moderator: luis

Post Reply
gregf
New Member
Posts: 3
Joined: Tue Aug 27, 2013 1:00 pm
First Name: Greg
Location: McLean VA

Phoenix set up

Wed Jun 04, 2014 10:49 am

Got my new Phoenix and HPR last week and they are awesome. I set the IP to about 140 and it breathes nice. There is a leak somewhere because the IP pressure drops when I shut off the tank valve. Can't hear it. Question: 3 washers came with it- the thin red one and 2 clear ones. Should I have used all 3 on the Phoenix? My DAAM only had the single red one. Any advice would be welcome. Thanks
gregf
New Member
Posts: 3
Joined: Tue Aug 27, 2013 1:00 pm
First Name: Greg
Location: McLean VA

Re: Phoenix set up

Wed Jun 04, 2014 10:52 am

OK, I'm a dummy. The connection to the hookah port was loose. Still wonder about the washers though.
User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Phoenix set up

Wed Jun 04, 2014 11:18 am

Good information to review on Phoenix first stage setup.

CLICK HERE
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
gregf
New Member
Posts: 3
Joined: Tue Aug 27, 2013 1:00 pm
First Name: Greg
Location: McLean VA

Re: Phoenix set up

Wed Jun 04, 2014 11:23 am

Thanks, Bryan. Don't know how I missed that before. Diving the reg Sunday.
User avatar
Bronze06
Master Diver
Posts: 666
Joined: Tue Jul 01, 2014 5:33 am
First Name: Russell
Location: Tabuk, Saudi Arabia

Re: Phoenix set up

Sun Aug 03, 2014 4:55 am

Thanks for all the great info on this post. I will be building my own here In Saudi Arabia in about a week. This forum is a Godsend of information. Bryan you are the Man.
"Where'd ya get that ol' thang, don't cha' know them thare things ill kill ya!"

Live From the Red Sea,

Russ
Post Reply

Return to “Phoenix and Argonaut Specialty Area”

Who is online

Users browsing this forum: No registered users and 99 guests