Vintage Double Hose

i have a 2019 model kraken DIN, i would like to convert it back to yoke (i dont want to use an adapter) does anyone know what brand yoke will work?

The newer Argonaut use the metric threads. I would first ask Bryan, he may be able to help you.

If Bryan can not help at this point, I know Mares uses the same yoke nut threads, but I am not sure which model yoke or yoke nut would fit best.

There may be other brand names, but I don't know.

Good luck

I do have a Mares yoke, yoke nut, and yoke screw. They are in excellent condition, as they came off of a Mares regulator that I converted over to DIN. I did try the Argonaut yoke screw, and it is the proper thread size. I did not try the yoke nut, but as Luis, has indicated, it is the same thread size. If you are interested in the set, let me know through my email at [email protected]. I can send you photos through an email.

Greg